Leister AIRPACK High Pressure Blower

The Leister AIRPACK is a three-phase side channel blower engineered to supply high-volume, high-pressure air to multiple Leister air heaters and compressed air nozzle systems simultaneously in continuous industrial operation.

High-Volume Air Supply for Industrial Process Lines

Industrial assembly lines and process heat stations operate under conditions where intermittent or insufficient air supply directly translates to production stoppages and process failures. When multiple air heaters must run concurrently, or when compressed air nozzle arrays demand sustained pressure to perform drying, forming, or thermal processing functions, a conventional blower introduces a critical bottleneck.

The AIRPACK is designed to eliminate that constraint. With a static pressure of 30 kPa and airflow reaching 4400 l/min at 60 Hz, it provides the consistent, high-pressure air volume that demanding industrial environments require – without the compromise of shared supply or reduced output under load.

AIRPACK Technical Capabilities and Engineering Performance

• Side Channel Blower Architecture: Delivers sustained high-pressure output through a side channel blower design, ensuring stable airflow under continuous load rather than the pressure drop common in centrifugal alternatives.
• High Airflow Capacity: Moves up to 3700 l/min at 50 Hz and 4400 l/min at 60 Hz, providing sufficient volume to supply multiple downstream air heaters or nozzle arrays from a single air source.
• 30 kPa Static Pressure: Maintains 30,000 Pa static pressure at both 50 Hz and 60 Hz, generating the pressure levels required to operate Leister compressed air nozzles efficiently and at full process speed.
• Three-Phase Power Compatibility: Configured for 230/400 V at 50 Hz and 275/480 V at 60 Hz with blower power of 2200 W and 2600 W respectively, aligning with standard industrial electrical infrastructure across Oman and the GCC.
• Continuous Operation Rating: Engineered for uninterrupted duty cycles with a maximum ambient and air inlet temperature tolerance of 40 degrees C, making it operationally suited to Gulf region industrial environments.
• IP54 Protection Class: Rated IP54 per IEC 60529, providing resistance to dust ingress and water spray – appropriate for industrial floor, workshop, and site-edge deployment conditions.
• Low Noise Emission: Operates at 73 dB(A), a noise level consistent with productive industrial environments where operator communication and process monitoring must be maintained.
• Standardised Port Dimensions: Air inlet and outlet at 60 mm outer diameter facilitate straightforward integration with existing Leister process configurations and ducting systems.

Industrial and Process Applications for the Leister AIRPACK in Oman and the GCC

• Multi-Heater Industrial Assembly Lines: Supplies simultaneous air volume to two or more Leister air heaters operating in parallel along a production or assembly line without pressure loss at any outlet.
• Compressed Air Nozzle Systems: Provides the elevated static pressure required to operate Leister compressed air nozzles at rated performance for precision drying, component forming, or surface treatment applications.
• Industrial Drying Processes: Delivers consistent high-volume airflow to drying stations where surface moisture must be removed rapidly and uniformly as part of a controlled production sequence.
• Process Heat Integration: Functions as the dedicated air supply unit within larger Leister process heat configurations, ensuring that air volume and pressure remain stable regardless of downstream demand variation.
• Continuous Production Environments: Supports uninterrupted operation across shift-length production cycles in manufacturing, fabrication, and industrial processing facilities operating under GCC climatic conditions.

Leister AIRPACK – Available Through iBuild, Authorised Distributor in Oman

iBuild is an authorised distributor for Leister in the Sultanate of Oman, supplying genuine Leister equipment with the manufacturer credentials, technical knowledge, and in-country support that specification-driven projects require. The AIRPACK is available through iBuild with access to Leister-trained technical expertise, ensuring correct equipment selection, application guidance, and lifecycle support throughout the operational life of the unit.

For industrial operations across Oman and the GCC requiring a dependable, high-pressure air supply solution, iBuild provides the local availability and engineering support to ensure the AIRPACK is correctly integrated and performing to specification from day one.